Panasonic SF4B-H12C Instruction Manual page 24

Mounting
<In case of using intermediate supporting bracket for use with standard mounting brack-
et MS-SF4BC-5 (optional)>
Step 1 Secure the bracket with two M3 flat head screws (purchase separately). The tightening
torque should be 0.5N•m.
<In case of rear mounting>
20mm
Intermediate supporting bracket for
use with standard mounting bracket
MS-SF4BC-5 (Optional)
M3 flat head screws
(Purchase separately)
Step 2 Insert this device into the intermediate supporting bracket.
<In case of rear mounting>
Note: SF4B-H□C□: 48 beam channels or more, SF4B-A□C□: 24 beam channels or more require intermediate
supporting bracket for use with standard mounting bracket MS-SF4BC-5 (optional).
SF4B-H40C□, SF4B-H48C□, SF4B-H56C□, SF4B-A20C□, SF4B-A24C□, SF4B-A28C□: 1 set
SF4B-H64C□, SF4B-H72C□, SF4B-H80C□, SF4B-H88C□, SF4B-H96C□, SF4B-A32C□, SF4B-A36C□,
SF4B-A40C□, SF4B-A44C□, SF4B-A48C□: 2 sets
24
Ramco National
<In case of side mounting>
20mm
<In case of side mounting>
Main body
© Panasonic Industrial Devices SUNX Co., Ltd. 2014
800-280-6933 | nsales@ramcoi.com
Intermediate supporting bracket for
use with standard mounting bracket
MS-SF4BC-5 (Optional)
M3 flat head screws
(purchase separately)
Main body
www.panasonicsensors.com