Samsung RVMC060GDM0 Technical Manual page 47

6. Indoor unit PCB option code
6-1. PCB option code input method (example : 021E31142285)
Be sure to input the option code suitable for the indoor unit by use of wireless remote controller after replacing
the PCB of indoor unit.
Follow to do the following 15 steps sequentially.
Operation method
Step 1
Method)
Remove the battery of remote
controller.
Push the temperature adjustment
button simultaneously.
Insert the battery.
Result)
When the display of remote
controller is indicated as shown
in the right, then go to the step 2.
Step 2
Method)
If the first digit of remote
controller shows "0", go to the
step 3.
If it shows 1, press the operation
selection button one time to
change it into 0 and then go to
step 3.
Step 3
Method)
Input the second digit of option
code by pressing the temperature
adjustment button (up).
example) 021E31142285
Result)
If 2 is displayed, go to the step 4
(whenever pressing the button,
1~9, A,B,C,D,E,F are lit in order.)
Applicable button
ΙΙ
25
Indicating state