Samsung RVMC060GDM0 Technical Manual page 241

2-2. 4-way cassette type
(1) Accessories
Wireless remote Battery (2)
controller (1)
4x12 Tapped Bolt (4)
screw (2)
(2) Installation
1) Open the electrical component box cover removing the screws.
2) Install the panel using two hooks on the both sides of the indoor unit.
3) Connect the cables of the panel to the PCB as shown in figure.
4) Close the electrical component box cover and secure the screws.
5) Secure the panel to the indoor unit using the bolts(4EA).
There are four kinds of air blocking kits. Fill up the air
outlet(s) with one or more kits depending on the situation,
then install the insulation to block air completely.
Remote control Owner's
holder (1) instructions (1)
Air blocking kit (1)
Must be separately purchased
17
Owner's
instructions (1)
Panel
Panel fixing holes
Hook and Eye
Eye
Air blocking
kit