Rx Noise Cancel Function; Rx Bass Boost Function; Tx Bass Boost Function; Tx Noise Cancel Function - Icom IC-M73 Instruction Manual

D RX Noise Cancel function
Set the Noise Cancel function for reception. The function may not be
available, depending on the transceiver version.
in the received signal to approximately one half.
in the received signal to approximately one third.
in the received signal to approximately one tenth.
Push
RX noise cancel
OFF (default)
D TX Noise Cancel function
Set the Noise Cancel function for transmission. The function may not
be available, depending on the transceiver version.
nents in the transmitted signal to one third.
Push
TX noise cancel
OFF (default)
" "
RX noise cancel 3
" "
-
TX noise cancel ON
D RX bass boost function
Set the bass boost function for reception.
be available, depending on the transceiver version.
ceive audio tone.
Push
RX bass boost
OFF (default)
D TX bass boost function
Set the bass boost function for transmission.
not be available, depending on the transceiver version.
mit audio tone.
Push
TX bass boost
OFF (default)
8
SET MODE
" "
The function may not
-
RX bass boost ON
" "
The function may
-
TX bass boost ON
2
4
5
7
8
9
29