Atis Code Programming (For Only The Dutch And German Versions) - Icom IC-M73 Instruction Manual

ATIS code programming
The 10-digit ATIS code can be programmed and confirmed
with the following operation.
The ATIS code programming is not necessary and con-
firmation can only be performed when the ATIS code has
been programmed by your dealer. The code programming
can be performed 1 time only, if the code has not been
programmed by your dealer.
q
Push [F] to enter the function mode,
and then push [Y]/[Z] to select the
ATIS code programming function.
w Push
to edit the ATIS
code.
acter of the code blinks.
e
Push [Y]/[Z] to select a number.
r Push
to move to the
right; then push [Y]/[Z] to select a
number.
to move to the
left.
-
FUNCTION MODE OPERATION
t
After inputting the 10-digit ATIS
code, push
the code into the memory, then
goes to the ATIS code confirma-
tion mode.
Deleting the ATIS code (All clear):
While in the ATIS code editing mode, push
lete.
D ATIS code confirmation
q
Push [F] to enter the function mode, and then push [Y]/
[Z] to select the ATIS code programming function.
w Push
to confirm the
ATIS code.
scrolls in the channel comment dis-
play.
e Push
to return to
normal operation.
.
to write
Scrolls
] to de-
Scrolls
7
2
4
5
7
8
9
23