Automatic Recording Function (Depending On Versions) - Icom IC-M73 Instruction Manual

When this function is turned ON, the transceiver automati-
cally records the received signal into the memory.
The maximum recording time is 60 seconds.
nal is added into the same data.
30 for details.
NOTE: Even if you turn OFF the transceiver, this function remains
ON.
Starts recording Stops recording
Example: 40 seconds
Starts recording
60 seconds
These contents
After 60 seconds has passed from
won't be recorded.
starting the automatic recording,
this function records the 60 seconds
before stopping to record.
When receiving a signal for 60
seconds or less, this function
records all contents.
Stops recording
FUNCTION MODE OPERATION
q
Push [F] to enter the function
mode, and then push [Y]/[Z] to
select the automatic recording
function.
-
w Push
function ON or OFF.
pears when the function is turned
ON.
function mode.
e When a signal is received, the
transceiver automatically starts
recording.
when the received signal disap-
pears, or the received signal strength becomes weaker than the
set threshold level in the set mode
(p. 30).
to turn the
Automatic recording
mode appears.
-
Automatic recording
icon appears.
, exits the
"REC" is appeared
while recording.
7
2
4
5
7
8
9
19