Manual Recording Function (Depending On Versions) - Icom IC-M73 Instruction Manual

7
FUNCTION MODE OPERATION
You can record the received signal whenever you want by us-
ing the manual recording function.
This function can record the received signal for maximum 30
seconds.
The transmitted signal cannot be recorded.
The previously recorded signal will be overwritten when you re-
cord the next audio using this function.
Start manual
recording.
Example: 20 seconds
Start manual
recording.
30 seconds
30 seconds after you start the manual recording, the
recording will automatically stop.
18
Stop manual
recording.
When receiving a signal for 30
seconds or less, this function
records all contents.
Automatically stops
recording.
These contents
will not be recorded.
q Push [F] to enter the function mode,
and then push [Y]/[Z] to select the
manual recording function.
w Push
to start record-
ing.
transceiver continues recording
without audio.
e
Push [F] to stop the recording.
after 30 seconds.
Manual recording
mode appears.
"REC" appears
while recording.