Valmar EASY 3 TTi Handling, Operating And Maintenance Manual page 70


 remove each blade from the mixer individually (push the blade
downwards until it jumps off the shaft);

 Install new blades on the mixer:
Hold the blade with both hands.

Place the blade in position with spring facing beater edge. Press it towards the
mixer and towards the shaft until it locks in place.
The slider must lock onto the shaft. Please check, whether the slider is firmly
attached to the shaft and whether it is placed correctly.
It is strictly forbidden to put plastic parts (sliders) of the appliance into the
dishwasher to clean them!
Incorrectly and correctly attached sliders:
70