Push-Button Panel (Production - Cooling) - Valmar EASY 3 TTi Handling, Operating And Maintenance Manual

7.3 PUSH-BUTTON PANEL (PRODUCTION – COOLING)
7.3.1 KEYS
7.3.1.1 START key
7.3.1.1.1 START with the START CYCLE BUTTON on the PUSH-BUTTON PANEL
The START CYCLE button
menu.
1. Press the button
program or the LAST program used.
2. Press START CYCLE
program (NEW or LAST).
3. Program screen.
Changing the program set to the START CYCLE button
Tip: Press the
button. Display switches to the program screen. Enter one of the menu icons
and select the desired program. For further information see the chapter Shortcut
to program start)
All menu programs are started with the START CYCLE button
You are notified of the end of the cycle by a beep. A message is displayed to
take out the ice cream. Should the operator not take out the ice cream after the
notice, the machine will keep ice cream consistency automatically until
extraction, or until the end of the maximum time limit.
START CYCLE button
is always set to one of the programs from the
to display the set NEW
again to start the
button to change the program set to the START CYCLE
can be set to one of the programs available on menu.
30
.