Valmar EASY 3 TTi Handling, Operating And Maintenance Manual page 31

7.3.1.1.2 START with the START CYCLE BUTTON from the MENU
1. Press the button
to the key or start last program used.
2. Select one of the icons representing the
various submenus to enter the list of
available programs.
3. Use the UP / DOWN arrows
the list of available programs.
Select the desired program by pressing the
relevant button (e.g. 03). When pressed,
the button changes color and becomes
black.
4. Press the button with the name of the
program. The button becomes black (active
button).
5. Press the button to start the machine.
The end of the cycle is notified by a beep
and a light signal (if any). A message is
displayed to take out the ice cream. The
machine will keep ice cream consistency
automatically until extraction, i.e. until the
end of the maximum time limit.
7.3.1.2 Key CONTINUOUS MIXING
The CONTINUOUS MIXING button activate the low mixing with the compressor
off into the cylinder. This low mixing you can use for:
 mix mixtures in the cylinder,
 rinse the cylinder,
 wash the cylinder at the end of production.
1. Press the button to start a low continuos
mixing.
to set another program
to scroll
31