8.2.2 PROGRAM MODIFICATIONS AND SETTINGS
1. Start the selected program by pressing one
of the three available buttons.
2. In running program press SET button
3. Modify parameters with the
4. Press OK button
5. Press the BACK button
previous screen.
6. Press the
button to display the running
step.
In program STEPS you can change some of the following parameters
depending which MODE the program uses:
MODE 1 which is based on the temperature *
MODE 2 which is based on the time
MODE 3 which is based on the density.
buttons.
to confirem the value.
to return to the
46