Valmar EASY 3 TTi Handling, Operating And Maintenance Manual page 66


 Slide the cover lid on batch feeder.
12.3.1 SANITIZE THE PROCESSING CYLINDER BEFORE USE
 Make sure that the mixture treating control panel is in STOP state.
 Make sure that the outlet hole is well closed.
 Pour approximately 4 inches (10 cm 1 gallon, 4 liters) of sanitizing
solution into the cylinder.
 Close the batch feeder cover.
 Press the MIXING key.
 Let the machine operate for 10 seconds at the most! The appliance is
allowed to run without ice cream mixture for 10 seconds at the
most!
 Press the STOP / RESET key.
 Place a suitable container under the outlet opening and empty the
sanitizing solution out of the cylinder.
66