Valmar EASY 3 TTi Handling, Operating And Maintenance Manual page 29

7.2.2.2 UPLOAD OF NEW PROGRAM OR NEW SOFTWARE
The program is uploaded only when the machine is powered off before inserting
the USB key with new software version!
1. Make sure the machine is OFF before starting.
You can do this by pressing on/off switch (red
button). Then Insert the USB key with new
database and/or program.
2. Turn on the machine by putting the on/off in ON
position.
3. New software is uploaded automatically. At first
the machine start screen is displayed.
4. A pop up message appears. Confirm the update
by pressing OK button. Check if everything is
updated (info menu screen). If confirm pop up
message is not displayed during start, then
software update cannot proceed. Check USB
key on a computer.
8. The start with updated software is like first use of
new machine. Firstly the LANGUAGE
SELECTION screen appears. Select the desired
language.
5. Read the text and then press the confirm button
to confirm you understand disclaimer.
6. The HOME screen is displayed. The machine is
ready for use in the selected language.
Press the BACK button
button to cancel the operation and return to the HOME screen.
to return to the previous screen. Press the HOME
29