Part Ii Local Network Access; Powering And Networking - Panasonic PI-BUA5MWA Operating Instructions Manual

Part II Local Network Access

1. Powering and Networking

1. Use PoE i.e., compliant with IEEE802.3af protocol.
2. Connect the PoE switch and cameras PoE connector.
3. Switch on the PoE switch.
4. Default IP address of the camera is 192.168.1.108
5. Connect the PC on the PoE switch & configure PC IP address in the same
series as IP camera.
6. Launch an internet browser on the local PC.
7. Enter the IP address of the camera in the address bar for the browser.
8. Enter username and password (Default username: admin & password:
admin123) to login to the IP camera.
7