SawStop T-Glide Fence System Owner's Manual page 3

Unpacking Your T-Glide Fence System
While unpacking your saw, verify that you have all the components shown below for your specific fence system.
The T-Glide Fence System – Industrial Series II is available in either a 52" system or a 36" system. Although the
components pictured below are from the 52" system, the components from the 36" system are similar.
support leg (2)
front rail
rear rail
extension table
leg support
bracket (2)
main tube
leveling feet (2)
fence handle hardware bag
Owner's Manual 5 mm hex key
5 mm ball-end T-Glide fence
hex driver
page 1