Time Zone - Pioneer DVR-LX60D Operating Instructions Manual

Getting started
04
Use the / buttons to set your

time zone.

You can set this by selecting a city or a
time relative to GMT.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Press  then use the / buttons to
select 'On' or 'Off' for summer time,
then press ENTER.
Select On if you are currently using
summer time.
k Setting Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator p Navigator Summer Time
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
k Setting Manual Clock Setting
t Line System
Date
er Save
P
Time
p Navigator p Navigator
Time Zone
Summer Time
• Use the / buttons to change the
value in the highlighted field.
• Use the / buttons to move from one
field to another.
• You can go back to the previous screen
in the Setup Navigator by pressing
RETURN/EXIT.
ENTER
10 Select the TV screen type,
'Wide (16:9)' or 'Standard (4:3)'.
k Setting TV Screen Size
Line System
er Save
P
p Navigator p Navigator
30
En
1/2
Australia
Adelaide
O ff
1/2
Australia
Adelaide
On
2/2
MON 01 / 01 / 2007
00 : 00
Australia
Adelaide
On
Wide (16:9)
Standard (4:3)
ENTER
11 Select whether or not your TV
is compatible with progressive scan
video.
k Setting Progressive
Line System
er Save Compatible
P Not Compatible Not Compatible
p Navigator p Navigator Don't Know
• This screen is not displayed when an
HDMI signal is being output.
12 ENTER Press to continue after reading
the HDD caution.
k Setting In the event of HDD failure, recordings may
be lost or normal playback/recording may
Line System
not be possible.
er Save
As recordings might be lost in case of a HDD
P
failure, we recommend to use the HDD only
as temporary storage media.
p Navigator p Navigator
Please copy recordings you want to keep
to recordable DVD.
Press ENTER to continue.
ENTER
13 Select 'Finish Setup' to exit
the Setup Navigator, or 'Go Back' if you
want to start again.
k Setting
S etu p is c omplet e!
Line System
er Save
F inis h S e tup F inish S e tup
p Navigator p Navigator Go Ba c k
That completes basic setup using the Setup
Navigator.
• If there are blank channels with no
station, you can set these to skip using
the manual channel setting. See Manual
CH Setting on page 109.