Connecting Other Av Sources - Pioneer DVR-LX60D Operating Instructions Manual

Connections
Unified language function
By receiving language information from a
connected plasma television, you can have
this unit's language settings automatically
change to those of the plasma television
(language information can be received only
when no media is being played back and no
recordings are taking place, or when you
choose not to display this unit's GUI
displays).
Important
• Depending on the type of plasma
television, some HDMI input terminals
do not support the HDMI Control
function. For details, see the operating
instructions supplied with your plasma
television.
• To use the following functions, set this
unit's HDMI Control to Off (page 117).
– When you want this unit to
automatically switch off upon
completion of time recording. (When
HDMI Control is set to On, this unit
does not automatically switch off if your
plasma television is switched on upon
completion of time recording.)
– When using the Video Control function
of an external component.
– Child lock settings (page 48).
– When you connect a SCART cable and
an HDMI cable to the same plasma
television simultaneously.
• HDMI Control may not operate properly
if you do not use an HDMI cable that
supports the HDMI 1.3 Specification.
• Controls may not function properly in
certain situations, such as immediately
after you have connect an HDMI cable,
turn this unit's power off or remove the
power cable for this unit or the
connected component. If you experience
any problems, set HDMI Control to On
for all connected units, and then display
the pictures stored on this unit on your
plasma television to improve the
situations.
• We cannot guarantee this unit will work
with HDMI control-compatible
components other than those made by
Pioneer.

Connecting other AV sources

Connecting a VCR or analog
camcorder
HDD/DVD
A.TV D.TV PLTV DivX COPY
STANDBY/ON DV IN USB
AUDIO/VIDEO
OUTPUT
(Rear panel)
1
Analog camcorder
To audio/video input
VCR
1 Connect a set of audio and video
inputs of your VCR or camcorder to a set
of outputs on this recorder.
This enables you to record from this recorder
to your VCR or camcorder.
• You can use standard video or S-video
cables for the video connection.
• Alternatively, you can use the AV2
(INPUT 1) SCART connector for audio/
video input and output with just one
SCART cable.
2 Connect a set of audio and video
outputs of your VCR or camcorder to a
set of inputs on this recorder.
This enables you to record tapes from your
VCR or camcorder.
• You can use standard video or S-video
cables for the video connection.
• The front panel connections make
convenient connections for a camcorder
input.
OPEN/CLOSE
HDMI
INPUT 2 S-VIDEO VIDEO L(MONO) R AUDIO REC
ONE TOUCH
STOP REC
COPY
INPUT
CH A.TV/D.TV
SELECT
AUDIO/VIDEO
INPUT
(Front panel)
2
From audio/video output
02
21
En