Pioneer DVR-LX60D Operating Instructions Manual page 107

The Initial Setup menu
Setting
Setup Navigator
Digital Tuner
Replace Channels
If you execute a Replace Channels command, any timer recordings set for D.TV channels will be erased.
Add New Channels Next Screen
Channel Sort
Channel Options
Options Explanation
Start Select to start the Setup Navigator. See also
Switching on and setting up on page 28
Next Screen Scans for digital channels and replaces all the
channel presets with the results. Before the scan
starts you will need to select your area.
After the scan is complete the recorder tells you
whether any new channels were found, and if so,
how many.
(You can cancel the scan before it has finished by
pressing HOME MENU or RETURN/EXIT. In this
case, no channels are set.)
Automatically scans for new digital channels.
After the scan is complete the recorder tells you
whether any new channels were found, and if so,
how many.
(You can cancel the scan before it has finished by
pressing HOME MENU or RETURN/EXIT. In this
case, no new channels are set.)
Next Screen
Use this screen to sort channel presets into your
prefered order. Use the /// buttons to
highlight the channel you want to move, press
ENTER. Use the cursor buttons again to highlight the
position you want to move the channel preset to,
then press ENTER again.
(If there are more channel presets than will fit on one
screen, you can select the next/previous page by
highlighting the small triangular marks and pressing
ENTER.)
Next Screen From this screen you can skip or lock channels.
Locked channels will require the correct password to
be entered before the channel can be watched. Use
the /// buttons to highlight a preference box
and press ENTER to toggle the preference.
To enter this screen, input the parental lock
password when prompted (if one has not yet been set
then the password you enter becomes the parental
lock password).
15
.
107
En