Pioneer DVR-LX60D Operating Instructions Manual page 47

Recording
ENTER
5 After entering all the timer
recording information, highlight 'Store
Programme' and press ENTER.
The timer recording list screen is displayed
again. The timer programme you just input
appears in the list. The rightmost column
shows various timer recording status
messages:
• OK – Can be recorded.
• Time Over – Not enough space on the
HDD (the recording won't finish).
• Over 12h – Recording time of over 12
hours set (when recording to the HDD
the recording will be split into two titles).
• Overlap – Two timer programmes
partially or completely overlap. The one
starting earlier will take priority.
• Until ... (eg., Until 13/8) – For a regular
recording, the last programme that
could be recorded is shown.
• Data Over – Can't record because the
disc management area of the disc is full.
• Cancel Once – A regular timer
programme is set to skip.
• Can't Rec – Not possible to record.
• Title Over – Can't record because there
is already the maximum number of titles
on the disc (HDD: 999; DVD: 99).
• Recording – The programme is currently
recording.
• Standby – The recorder is in timer
recording standby.
• nothing displayed – Another timer
recording or copying is in progress.
6 Press to exit the timer
HOME MENU
recording screen.
Note
• If you set a DVD timer recording but
there is no recordable DVD disc loaded,
or the disc loaded doesn't have enough
free space for the complete recording,
Recovery is shown. In this case (unless
you load a suitable disc before the
recording actually starts), the recorder
will use the HDD for recording. (The
message Can't Rec will appear if there
are already 999 titles on the HDD or if
there is not enough free space on the
HDD for recording.)
Deleting a timer programme
You can delete timer programmes you no
longer need.
TIMER
REC
1 Press TIMER REC.
2 Highlight the timer
programme you want to erase.
ENTER
Press  then select 'Erase'
3
from the command menu panel.
• Select Yes to confirm or No to cancel.
• You can also just press CLEAR when the
timer programme is highlighted.
Skipping a regular timer
programme
If you've set a regular daily or weekly timer
programme, you can set the recorder to skip
the next scheduled recording.
TIMER
REC
1 Press TIMER REC.
2 Highlight the timer
programme you want to skip.
ENTER
Press  then select 'Cancel
3
Once' from the command menu panel.
• In the timer programme list, Cancel
Once appears by the programme.
• You can also just press  PAUSE when
the timer programme is highlighted.
06
47
En