Pioneer DVR-LX60D Operating Instructions Manual page 27

Controls and displays
be described on-screen, and changes
depending on the screen being displayed.
8 PAUSE LIVE TV (page 42)
Press to start recording the current TV
channel, but with playback paused,
effectively pausing the broadcast.
9 AUDIO (page 39, 40, 61, 62)
Press to change the audio language or
channel. (When the recorder is stopped,
press to change the tuner audio.)
SUBTITLE (page 61)
Press to display/change the subtitles
included in multilingual DVD-Video
discs.
While watching D.TV, press to change
the D.TV subtitles.
ANGLE (page 62)
Press to switch camera angles on discs
with multi-angle scenes.
10 Number buttons, CLEAR, +
Use the number buttons for track/chapter/
title selection; channel selection, and so on.
The same buttons can also be used to enter
names for titles, discs and so on.
Use CLEAR to clear an entry and start again.
11 TV CONTROL buttons (page 121)
After setting up, use these controls to
control your TV.
12 HDD/DVD (page 41)
Press to select the hard disk (HDD) or DVD
for recording and playback.
13 Recording controls (page 41)
 REC
Press to start recording. Press
repeatedly to set the recording time in
blocks of 30 mins.
STOP REC
Press to stop recording.
14 INFO
While watching D.TV, press to display the
information banner.
Press to see additional information for the
highlighted item in the EPG.
15 GUIDE
While watching D.TV, press to display the
EPG screen; press again to exit.
16 HOME MENU
Press to display the Home Menu, from
which you can navigate all the functions of
the recorder.
17 RETURN/EXIT
Press to go back one level in the on-screen
menu or display.
18 TIMER REC (page 46)
Press to set a timer recording.
REC MODE (page 40)
Press repeatedly to change the
recording mode (picture quality).
19 ONE TOUCH COPY (page 79)
Press to start One Touch Copy of the
currently playing title to DVD or the HDD.
20 INPUT SELECT (page 49)
Press to change the input to use for
recording.
21 MENU (page 54)
Press to display the disc menu if a DVD-
Video, finalized DVD-R/-RW (Video mode) or
finalized DVD+R/+RW disc is loaded.
22 DISPLAY (page 63)
Displays/changes the on-screen information
displays.
23 G-Code® (page 45)
Press then use the number buttons to enter
a G-Code programming number for timer
recording.
G-Code is a registered trademark of
Gemstar Development Corporation.
The G-Code system is manufactured
under license from Gemstar Development
Corporation.
24 TEXT (page 39)
Press to display Teletext information if
available during digital broadcasts.
25 TV/DVD
Press to switch between 'TV mode', in which
you get the picture and sound from the TV's
tuner, and 'DVD mode', in which you get
picture and sound from the recorder's tuner
(or an external input).
03
27
En