Pioneer DVR-LX60D Operating Instructions Manual page 117

The Initial Setup menu
Setting
Audio Output
This setting is not available when a DVI device is connected
HDMI Control
• For more information about HDMI Control, see HDMI Control on page 20.
• This setting is available even if you are not connected to an HDMI device.
• For more information see Troubleshooting on page 128.
Options
On Screen Display
Front Panel Display On •
Remote Control
Mode
AV. Link
When set to Pass Through, make sure to set Power Save (page 106) to Off.
Options Explanation
Auto • Dolby Digital, MPEG and DTS sources are output as a
bitstream signal. However, depending on the Audio
Out setting, number of audio channels, and the
HDMI-connected device, Linear PCM audio may be
output.
PCM
All audio signals are converted to Linear PCM (except
DTS).
Bitstream Priority Select if the connected device is compatible with
bitstream audio.
On •
Enable the HDMI Control function. Select this option
when connected to an HDMI Control-compatible
Pioneer plasma display, AV system (amplifier or AV
receiver etc.).
Off
Disable the HDMI Control function. Select this option
when not connected to an HDMI Control-compatible
component, or when connected to a component
manufactured by a company other than Pioneer.
On • The recorder displays operation displays (Stop, Play,
etc.) on-screen.
Off Switches off the on-screen operation displays.
The time is shown in the front panel display when the
recorder is in standby.
Off The front panel display is switched off in standby.
Recorder 1–3
If you are using more than one recorder in the same
(default: Recorder 1) room, set them to different IDs. This setting sets the
recorder ID; to change the remote controller ID, press
and hold RETURN/EXIT then press 1, 2 or 3 to set. The
remote will only control a recorder with the same ID.
This Recorder Signals received through the AV input when the
Only • recorder is in standby are not passed through to the
AV output.
Pass Through
Signals received when in standby are passed though
to the output for connected devices.
.
15
117
En