04
Getting started
•
Manual clock setting
If no stations in your area are
broadcasting time signals, you can set
the clock manually.
Use the
time zone.
You can set this by selecting a city or a
time relative to GMT.
k Setting
Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator
p Navigator
Summer Time
Press
then use the
select 'On' or 'Off' for summer time,
then press ENTER.
Select On if you are currently using
summer time.
k Setting
Manual Clock Setting
Line System
Time Zone
er Save
P
p Navigator
p Navigator
Summer Time
Set the date (day/month/year) and
time, then press ENTER to make all
the settings.
k Setting
Manual Clock Setting
Line System
Date
er Save
P
Time
p Navigator
p Navigator
Time Zone
Summer Time
• Use the
value in the highlighted field.
• Use the
field to another.
• You can go back to the previous screen
at anytime in the Setup Navigator by
pressing RETURN/EXIT.
38
En
buttons to set your
1/2
England
London
Of f
buttons to
1/2
England
London
On
2/2
SUN
01 /
01
/
2006
00 : 00
England
London
On
buttons to change the
buttons to move from one
ENTER
10
Select the EPG (Electronic
Program Guide) type to use.
• GUIDE Plus+: Use the Gemstar GUIDE
Plus+ EPG (see also Setting up the
GUIDE Plus+® system on page 40 and
Using the GUIDE Plus+® electronic
program guide on page 44).
• Digital EPG: Use the SI EPG (program
information broadcast together with
digital channels).
• If no channels were found when
scanning for digital TV channels then
this screen does not appear and the EPG
is set according to the country set in step
7 above.
ENTER
11
Select the TV screen type,
'Wide (16:9)' or 'Standard (4:3)'.
k Setting
TV Screen Size
Line System
er Save
Wide (16:9)
P
Standard (4:3)
p Navigator
p Navigator
ENTER
12
Select whether or not your TV
is compatible with progressive scan
video.
k Setting
Progressive
Line System
er Save
Compatible
P
Not Compatible
Not Compatible
p Navigator
p Navigator
Don't Know
• Note that progressive scan video is only
output through the AV1(RGB)-TV
connector and the component video
outputs.