Pioneer DVR-LX60D Operating Instructions Manual page 108

The Initial Setup menu
15
Setting
Auto Skip
Signal Check
Aerial Power
• If the setting keeps reverting to Off when you try to set to On or Auto, the aerial may not be connected properly,
or it may be shorted. In either case, check the connection and try making the setting again.
Analog Tuner
Auto Channel
Setting
108
En
Options Explanation
Off • No channels are automatically skipped.
Radio Radio channels are skipped when selecting
channels.
Data
Data channels are skipped when selecting channels.
Radio & Data
Radio and data channels are skipped when selecting
channels.
Next Screen Use this screen to check the signal level and quality
of digital channels. Use the / buttons to change
the RF channel; select Add New Channels then
press ENTER to scan for new channels; press HOME
MENU to exit.
On Power is supplied to the connected aerial (antenna)
when this recorder is on or in standby.
Auto
Power is supplied to the connected aerial (antenna)
only when this recorder is on.
Off • This recorder does not supply power to the
connected aerial (antenna).
Auto Scan
Select your country and then wait for the recorder to
auto tune into channels in your area. After auto scan
has finished, the channel mapping screen appears
showing which channels have been assigned to
which programme numbers. You can skip unwanted
channels using the Manual CH Setting option below.
Press HOME MENU to exit the channel mapping
screen.
Download from If your TV supports this feature you can download all
TV
the channels that your TV is tuned to via the SCART
input. Select your country and then wait for the
download to complete. After the download is
complete, the channel mapping screen appears, as
above.
See also the operating instructions that came with
your TV for more information.