Pioneer DVR-LX60D Operating Instructions Manual page 43

Recording
Important
• Pause Live TV only works with the built-in
A.TV (analog) tuner. It does not work with
the D.TV tuner or the external inputs.
Make sure the Auto Channel Setting is
set to Download from TV (see Auto
Channel Setting on page 108).
1 Connect this recorder to your TV with
a SCART cable.
2 Press HOME MENU.
3 Select 'Initial Setup' > 'Options2' >
'Pause Live TV' > 'TV's Tuner'.
4 Select 'Initial Setup' > 'Analog Tuner'
> 'Auto Channel Setting' > 'Download
from TV'.
• If the Download from TV option appears
grayed out, check the connections to
your TV and try again.
• Depending on your TV, you might have to
switch off and unplug it for a few
moments before plugging it back in and
switching it on again.
5 Follow the on-screen instructions.
Using the recorder's internal tuner for
Pause Live TV
If you haven't connected to your TV using a
SCART cable (or your TV is not compatible
with AV Link) you can use the recorder's
internal tuner for the Pause Live TV.
1 Press HOME MENU.
2 Select 'Initial Setup' > 'Options2' >
'Pause Live TV' > 'Recorder's Tuner'.
See Pause Live TV on page 118 to do this.
You can record the channel selected on the
recorder.
Using Pause Live TV
PAUSE
LIVE TV
1 Start recording the current TV
channel.
Recording continues with playback paused.
• Note that it may take up to 10 seconds
for recording to start.
2 Press to start playback.
You can also use the scan buttons (/
), pause ( PAUSE) and stop ( STOP)
— all without affecting the recording.
STOP REC
3 Press to stop the recording.
The operation is slightly different depending
on the viewing source. See the Operation
table below for details.
Tip
• When the Pause Live TV setting (see
page 118) is set to TV's Tuner, you can
press PAUSE LIVE TV while the recorder
is in standby to switch on and immediately
start recording. When set to Recorder's
Tuner, it is not possible to use the Pause
Live TV feature from standby.
• After pressing PAUSE LIVE TV, it will
take at least 10 seconds for the picture to
change (during this time, all controls
except the power button are inoperative).
(Note that startup from standby is not
possible if you have selected Recorder's
Tuner in Pause Live TV on page 118.)
• Please note that you can't record from
another component (VCR, etc.) that is
connected by a SCART cable to the AV2
(INPUT 1) connector using the Pause
Live TV feature.
06
43
En