Cisco Aironet CB21AG Installation And Configuration Manual page 73

Chapter 5 Configuring the Client Adapter
Table 5-2
Parameter
SSID2
SSID3
Go to the next section to set additional parameters, or click OK to save your changes and return to the
Cisco Aironet Desktop Utility (Profile Management) window.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Profile Management General Parameters (continued)
Description
An optional SSID that identifies a second distinct network and enables
the client adapter to roam to that network without having to be
reconfigured.
Range: You can key in up to 32 ASCII characters (case sensitive).
Default: A blank field
If a profile specifies more than one SSID, it cannot be included
Note
in auto profile selection or used with WPA/WPA2 passphrase.
This field is unavailable for any profiles that are included in
Note
auto profile selection or configured for use in an ad hoc
network.
An optional SSID that identifies a third distinct network and enables the
client adapter to roam to that network without having to be
reconfigured.
Range: You can key in up to 32 ASCII characters (case sensitive).
Default: A blank field
If a profile specifies more than one SSID, it cannot be included
Note
in auto profile selection or used with WPA/WPA2 passphrase.
This field is unavailable for any profiles that are included in
Note
auto profile selection or configured for use in an ad hoc
network.
Setting General Parameters
5-5