Using Leap Or Eap-Fast With A Manually Prompted Login; After Profile Activation - Cisco Aironet CB21AG Installation And Configuration Manual

Chapter 6 Using EAP Authentication

Using LEAP or EAP-FAST with a Manually Prompted Login

After Profile Activation

After you (or auto profile selection) activate a profile that uses LEAP or EAP-FAST authentication with
a manually prompted login, follow these steps to authenticate.
If auto profile selection is enabled, this procedure is applicable the first time auto profile selection
Note
activates a manual LEAP or manual EAP-FAST profile. After you follow these steps to enter your LEAP
or EAP-FAST credentials, you can switch profiles without having to re-enter your credentials until you
reboot your computer, eject and reinsert your client adapter, or change the profile in any way (including
its priority in auto profile selection). If auto profile selection is disabled, you must re-enter your
credentials every time you activate a manual LEAP or manual EAP-FAST profile.
When the Enter Wireless Network Password window appears (see
Step 1
EAP-FAST username and password and click OK. The domain name can be entered in the Log On To
field; it is optional.
Figure 6-6
The LEAP or EAP-FAST Authentication Status window appears.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Enter Wireless Network Password Window

Using LEAP or EAP-FAST with a Manually Prompted Login

Figure 6-6), enter your LEAP or
6-9