Cisco Aironet CB21AG Installation And Configuration Manual page 122

Setting Security Parameters
Perform one of the following to specify the username and password that will be used for inner PEAP
Step 7
tunnel authentication:
If you want your Windows username and password to also serve as your PEAP username and
•
password, check the Use Windows User Name and Password check box.
If you want to use a distinct username and password (which are registered with the RADIUS server)
•
to start the PEAP authentication process, follow these steps:
a.
b.
Step 8 If you selected a certificate or entered a distinct username and password and you want to implement added
security by further refining the network certificate that will be accepted and controlling the string used to set
up the outer PEAP tunnel, follow these steps:
Click Advanced. The Configuration Settings window appears (see
a.
Figure 5-18
Leave the Specific Server or Domain field blank to allow the client to accept a certificate from any
b.
server that supplies a certificate signed by the certificate authority listed in the Trusted Root
Certification Authorities drop-down box on the Configure PEAP (EAP-MSCHAP V2) window (this
is the recommended option) or enter the domain name of the server from which the client will accept
a certificate.
If the Login Name field is not filled in automatically, enter your username with nothing after it (for
c.
example, jsmith).
Note
d. Click OK to save your settings.
Click OK to save your settings and return to the Profile Management (Security) window.
Step 9
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-54
Enter your PEAP username and password in the corresponding fields.
Your Windows username is filled in automatically. Simply delete your Windows
Note
username and enter your separate PEAP username.
Re-enter your password in the Confirm Password field.
Configuration Settings Window
Some RADIUS servers require that the same name be entered for both the inner and outer
PEAP tunnels. That is, the same name may need to be entered in both the Login Name field
and the User Name field on the Configure PEAP (EAP-MSCHAP V2) window. Contact your
system administrator for information.
Chapter 5 Configuring the Client Adapter
Figure 5-18).
OL-4211-05