After A Reboot, Logon, Or Card Insertion - Cisco Aironet CB21AG Installation And Configuration Manual

Using LEAP or EAP-FAST with a Manually Prompted Login
If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision
Step 2
a PAC, click Yes.
If your client adapter authenticates, the window shows that each stage was successful and then
Step 3
disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.
If the authentication attempt fails, an error message appears after the authentication timeout period has
expired. Refer to the

After a Reboot, Logon, or Card Insertion

After your computer reboots, you log on, or you eject and reinsert the client adapter, the adapter does
not automatically attempt to authenticate. You must manually invoke the authentication process. To do
so, follow these steps.
If you rebooted your computer or logged on, complete your standard Windows login. Then open ASTU
Step 1
or ADU.
Step 2 Choose the Manual Login option from the ADU Action drop-down menu (see
Figure 6-7
You can also choose the Manual Login option from the ASTU pop-up menu (see
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
6-10
"Error Messages" section on page 10-12
Action Drop-Down Menu
Chapter 6 Using EAP Authentication
for the necessary action to take.
Figure 6-7).
Figure 6-8).
OL-4211-05