Cisco Aironet CB21AG Installation And Configuration Manual page 156

Viewing the Current Status of Your Client Adapter
Table 7-3
Status
Server Based Authentication
IP Address
Current Channel
Data Encryption
Signal Strength
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
7-6
Basic Client Adapter Status (continued)
Description
The method by which authentication to a back-end server is being
performed to establish secure connectivity.
Value: None, LEAP, EAP-FAST, EAP-TLS, PEAP (EAP-GTC),
PEAP (EAP-MSCHAP V2), or Host Based EAP
Refer to the
Note
details on these server-based authentication types.
The IP address of your client adapter.
The channel that your client adapter is currently using for
communications. This field displays Scanning while the client adapter
searches for a channel.
Value: Dependent on radio band and regulatory domain
Refer to the Channel parameter in
Note
setting the channel for your client adapter.
Refer to
Note
center frequencies, and regulatory domains for each channel.
The data encryption type that was negotiated with the access point (in
infrastructure mode) or another client (in ad hoc mode) upon
association.
Value: None, WEP, CKIP, TKIP, or AES
Refer to the
Note
details on these data encryption types.
The signal strength for all received packets. The color of this
parameter's progress bar provides a visual interpretation of signal
strength.
Value: Excellent (green), Good (green), Fair (yellow), Poor (red), or
No Link
Chapter 7
"Overview of Security Features" on page 5-14
Table 5-3
Appendix D for a list of channel identifiers, channel
"Overview of Security Features" on page 5-14
Viewing Status and Statistics
for
for information on
for
OL-4211-05