Automation: Voice Command; Setup - Honeywell Lyric User Reference Manual

Not to be confused with voice annunciation of system status (Home > Settings).
Voice Command offers control of Smart Scenes and Video by speaking in plain language. User-
selected trigger phrases spoken near the Controller alert the system to listen for further instructions.
Five command phrases can be assigned to trigger Smart Scenes. Assignable command phrases are
listed in the Voice Command Assignment
Video function exclusively.
NOTES • Voice Commands can only trigger Smart Scenes and launch the Video function. Voice
control of individual devices must be part of a Smart Scene triggered by voice.
• Voice commands cannot disarm the system in a single step. If a Smart Scene that
disarms the system is triggered by voice command, a user code is required.
• Verbal responses are available in English only.
• We suggest enabling Trigger Feedback (F, below) until you are familiar with Voice
Command. However, Voice Command can be used without Trigger Feedback.
• The Controller is designed to hear commands spoken in a normal voice from about 10
feet away. Background noise may affect Lyric's ability to recognize commands. You
may need to speak louder or move closer when there is a lot of background noise.
Adjust the system's responsiveness using the Command Sensitivity and Trigger
Sensitivity sliders along with settings on the Counter menu. See
(Sensitivity
• You can test voice recognition without setting up Smart Scenes by going to the
Home screen and saying your trigger phrase.

Setup

NOTE The system should be disarmed before setting up Voice Command.
E
F
G
A. Familiarize yourself with using Voice Command.
B. Assign Smart Scenes to command phrases.
C.
View a record of Voice Command events.
D. View and adjust sensitivity settings. See
E. Turn Voice Command on and off.
F. Turn verbal confirmation of trigger phrases on and off.
G. Select one of the three available trigger phrases.
H. Adjust sensitivity to command phrases to compensate for varying noise conditions.
I. Adjust sensitivity to trigger phrases to compensate for varying noise conditions.
J. Set volume of trigger feedback (verbal responses to your commands)

Automation: Voice Command

Home > Security > Tools > Voice Command
section. The command phrase "Cameras" controls the
Settings).
B
A
Counter (Sensitivity
C D
Settings), following.
29
Counter
H
I
J