Automation: Z-Wave Devices - Honeywell Lyric User Reference Manual

Automation: Z-Wave Devices

Z-Wave automation functionality is supplementary only and has not been
NOTE
evaluated by compliance agency.
Z-Wave® technology is designed to automate devices in a home control network. The Lyric™
Controller is a security enabled Z-Wave device that supports Z-Wave Network Wide Inclusion
(NWI) Mode.
The Controller and Z-Wave devices added to your system are linked together in a wireless
network. Each device in the network is assigned a unique address and cannot be activated by a
neighbor's Z-Wave controller. The Z-Wave network supports multiple controllers, allowing Z-
Wave remote controls to be used throughout the home.
NOTE: In some cases, a Z-Wave device might not report its status to the Lyric Controller
when an action is initiated at the device itself. This varies with the manufacturer.
Press Automation on the Home screen. The Z-Wave Device Management menu appears, initially
displaying categories of Z-Wave devices. (Your Controller's display may differ from these
illustrations.)
This screen may also display "Press to see Failed Devices". See
for more information.
Press the Down arrow for more options:
Consult your installer about the options available in your system.
Selecting a device category opens a list of devices in that category. An example of the Switch
category is pictured.
For most devices, status is indicated by the color of the icon.
The Refresh button updates device status indications on the display.
Failed Devices (Failed Nodes)
33