Honeywell Lyric Programming Manual

®
Lyric Lyric Lyric Lyric
Controller
Supplement – Apple ® HomeKit™
Programming the Lyric Controller Programming the Lyric Controller for using Apple's HomeKit
Programming Programming the Lyric Controller the Lyric Controller
The Lyric Controller can be used with Apple's HomeKit system for remote arming/disarming and
notifications of Lyric system events. You can also set up HomeKit's Automation feature to respond to Lyric
events.
Lyric must first be paired with HomeKit, using an iPhone® or an iPad® running the Home
For more information on HomeKit, visit http://www.apple.com/ios/home/.
Requirements Requirements
Requirements Requirements
Apple devices Apple devices Apple devices Apple devices
iPad & iPhone: iOS® 10 or later
•
Apple TV®: tvOS™ 9.0 or later
•
Lyric Controller Lyric Controller
Lyric Controller Lyric Controller
The Controller's software must be up-to-date.
•
A full-time internet connection is required for Lyric software updates.
•
Pairing Lyric with an iOS device Pairing Lyric with an iOS device Pairing Lyric with an iOS device Pairing Lyric with an iOS device
Pairing requires an iPad or iPhone with iOS 10 or later and the Home
HomeKit as an Accessory Accessory.
Accessory Accessory
Your iOS device should be within a few feet of the Lyric Controller.
•
The device's Wi-Fi® must be turned on.
•
The Lyric Controller's Wi-Fi must be operating.
•
1. Launch the Home Home app. If prompted, turn on the device's Wi-Fi and/or Bluetooth
Home Home
2. The app identifies any available accessories. Select your Lyric system.
NOTE NOTE NOTE NOTE:
process.
3. A keypad appears on the Lyric Controller's touch screen. Enter the 4 4 4 4 - - - - digit
The 8 8 8 8 - - - - digit digit HomeKit setup code then appears on the Lyric touch screen.
digit digit
4. On the iOS device, use the camera window in the app to capture the setup code. (If you wish, you
can enter the displayed code manually.) The device recognizes the Lyric Controller and the
Controller beeps 3 times.
If you need to confirm pairing, press Identify Accessory
times.
5. Press Done Done; Lyric appears in the app under Favorite Accessories Done Done
Apple HomeKit.
NOTE: NOTE
NOTE NOTE
user code] > Advanced > Reset HomeKit
When Lyric is paired with HomeKit, it is initially associated with HomeKit's "Default Room". You may want to
change this to reflect the location of the Lyric Controller. Typically, the Controller (seen below at far left) is
designated by the room where it is installed. Lyric's sensors are also displayed as accessories.
If your Lyric system is not identified, reboot the Lyric Controller and repeat this
If pairing fails, reset your HomeKit in the Controller:
Reset HomeKit Reset HomeKit Reset HomeKit
for using Apple's HomeKit
for using Apple's HomeKit for using Apple's HomeKit
Home app. The Lyric Controller appears to Home Home
Identify Accessory on the app, and the Controller will beep 3 Identify Accessory Identify Accessory
Favorite Accessories and Lyric is ready to use with Favorite Accessories Favorite Accessories
and repeat the steps above.
Home app. Home Home
and/or Bluetooth.
and/or Bluetooth and/or Bluetooth
digit Lyric Master User code.
digit digit
Security > Tools > [enter master