2.1
Introduction
You can access most of the connectors from the top of the board as it is being
installed in the chassis. If you have a number of cards installed, you may need to par-
tially remove a card to make all the connections.
2.2
USB Ports (USB1~11)
The two USB 3.0 ports on the rear plate and four USB3.0 on-board ports offer trans-
mission rates up to 5Gbps, besides the four USB 2.0 on-board ports and one Type-A
USB2.0 ports with 480 Mbps speed. Fuse protection is supported. The USB interface
can be disabled in the system BIOS setup.
USB11
USB3_4
USB5_6
USB9_10
USB7_8
ASMB-825 User Manual
USB1_2
14