Removing Cartridges From The Cap; Importing Cleaning Cartridges Through The Cap - StorageTek L180 Operator's Manual

Removing Cartridges From the CAP

Removing Cartridges From the CAP
To unlock the CAP, open the CAP, and remove cartridges from it:
1. At the system console, enter the VOLSERs of the cartridges you require. The
robot will retrieve the cartridges and insert them into the CAP.
2. Enter the console command to open the CAP. This will unlock the CAP.
3. Press the
4. Remove or pull down the magazine and remove the cartridges and store
them outside the library (refer to
"Cartridge
5. Repeat these steps until you have removed all the required cartridges.

Importing Cleaning Cartridges Through the CAP

Follow this procedure to import the cleaning cartridges into the reserved cells in
the library using the cartridge access port.
Note: Manually placing a cartridge in one of the reserved cells and initializing
2
M M
AIN E NU
F S C L
OG
C C
AP ONT E NT S
D I
R IVE NF O
C I
L E ANING NF O
D
IAGNOS T ICS
V I
E R S ION NF O
C
ONF IGUR AT ION
3-8
button on the operator panel to open the CAP.
CAP
Information").
the library will automatically enable the Auto Clean feature.
MENU
C67272
SELECT
3
C67273
Ninth Edition
"Storing Cartridges" in Appendix A,
1. Press the button to return the
MENU
display to the Main Menu.
2. Press the arrow buttons until the cursor
underscores CLEANING INFO.
3. Press the
SELECT
displays the Cleaning Info Menu.
button. The panel
95895