Avaya 3735 User Manual page 89

Important:
Never remove a handset from the charger until the instructions in the display tells you to do so.
If there is an error indication it may be allowed to remove the handset. After the old handset has
been in the charger, the new handset must be placed in the charger regardless if the
replacement was successful or not. Failing to do so may result in malfunction and the new
handset is sent for service.
Procedure
1. On the new handset, press and hold
Do not release
2. Put the new handset in the charger.
3. When the system displays the message "Start phone replacement?", release
Press Yes (left soft key).
The system displays the message "Follow the instructions. Each step can
take several minutes.".
4. Press OK.
5. When the text "Please insert old phone in charger" is displayed, replace the
new handset with the old handset. The handset can either be switched on or off.
If the CR3 Charging Rack is used, the left charging slot must be used for both handsets.
The handset restarts and after a few seconds, the system displays a message "Saving
settings. Do not remove phone from charger".
Important:
If the old handset cannot communicate with the charger, put the new handset in the
charger to restore its settings (the handset's IPDI). If this step is not performed, the new
handset must be sent for service. The settings of the old handset can be transferred to
the new handset by using PDM/Device Manager.
6. When the system displays the message "Please insert new phone in charger",
replace the old handset with the new handset.
The system displays the message "Restoring settings".
Important:
Do not remove the handset while the message "Restoring settings" is displayed.
7. When the system displays the message "Phone successfully replaced. Please
remove phone to restart.", remove the handset from the charger.
The handset automatically restarts.
July 2017
until you are instructed to do so.
Using Avaya 3735 DECT handsets connected to Integral Enterprise IEE 7.2
Comments on this document? infodev@avaya.com
.
Easy Replacement Procedure
.
89