Introduction to Bluetooth
In charger action when not in call
About this task
Use this procedure to define the functions of a handset when the handset is not on a call and not
placed in a charger.
Procedure
1. Press Menu.
2. Select Connections.
3. Select In charger.
4. Select Other actions.
5. Select one of the following:
• No action: No action is performed when handset is not in call and placed in charger.
• Switch off: When the handset is placed in the charger it will switch off. When it is
removed from the charger it will switch on again.
If you enable the handset restrictions, the handset might not be switched off when placed
in a charger.
July 2017
Using Avaya 3735 DECT handsets connected to Integral Enterprise IEE 7.2
Comments on this document? infodev@avaya.com
50