Selecting A Bluetooth Headset; Removing A Headset - Avaya 3735 User Manual

4. Select Connections > Bluetooth.
5. Select Headset.
6. Select Add new.
The system displays the Put headset in Pairing mode message.
7. Press OK.
The system searches for a Bluetooth headset connection.
8. When headset is found, press Pair.
9. (Optional) Enter the PIN code.
10. Press OK.
If the pairing is successful, the system displays Successful pairing. The Bluetooth
headset is connected and indicated by the (

Selecting a Bluetooth headset

Procedure
1. Press Menu.
2. Select Connections.
3. Select Bluetooth > Headset.
4. Select a headset by pressing up or down on the navigation key.
5. Press Select.
The system displays the message: Connection successful is displayed.
The headset is selected.
When a new headset has been selected any previous headset automatically gets
disconnected.

Removing a headset

Procedure
1. Press Menu.
2. Select Connections.
3. Select Bluetooth > Headset.
4. Select a headset by pressing the navigation key up or down.
5. Press More.
July 2017 Using Avaya 3735 DECT handsets connected to Integral Enterprise IEE 7.2
Comments on this document? infodev@avaya.com
) in front of the headset.
Operation
41