Huawei SUN2000-55KTL-HV-D1 User Manual page 82

SUN2000-(55KTL, 60KTL) Series
User Manual
No. Parameter Description
resumed automatically starts
startup after communication
recovers. If this
parameter is disabled,
the SUN2000 needs to
be started manually
after communication
recovers.
11 Soft start Specifies the duration
time for the power to
gradually increase
when the SUN2000
starts.
12 Current When the IV curves of
error PV strings are being
during scanned, the current
scanning change of PV strings
operating properly
should be monitored
to avoid inaccurate
scanning caused by
sunlight change. If the
current exceeds the
specified value, it is
determined that the
sunlight changes, and
the IV curves should
be scanned again.
13 Hibernate The SUN2000
at night monitors PV strings at
night. If Hibernate at
night is set to Enable,
the monitoring
function of the
SUN2000 will
hibernate at night,
reducing power
consumption.
14 PLC For SUN2000 models
communica that support both
tion RS485 and PLC
communication, when
RS485 communication
is used, you are
advised to set PLC
communication to
Issue 02 (2017-07-30)
Unit Default
Value
s The default
value varies
depending
on the grid
code. The
displayed
value
prevails.
A 0.20
N/A Disable
N/A Enable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range Remarks
 Enable
[20, 1800] N/A
[0.00, 2.00] N/A

Disable N/A
 Enable

Disable N/A

Enable
76