Table of Contents
Advertisement
SUN2000-(55KTL, 60KTL) Series
User Manual
No.
4
Connecting Cables to the Terminal Block
Step 1 Remove an appropriate length of the jacket and core wire insulation layer from the
communications cable using a wire stripper.
Figure 5-19 Stripping an RS485 communications cable
Step 2 Remove the cable terminal base from the terminal block. Connect the communications cable
to the terminal base.
Figure 5-20 Connecting cables to a terminal base
(1) RS485A IN
(3) RS485B IN
Step 3 Route the communications cable through the waterproof connector.
Issue 02 (2017-07-30)
Port Definition
RS485B OUT
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
RS485B, differential signal–
(2) RS485A OUT
(4) RS485B OUT
5 Electrical Connections
48
Advertisement
Table of Contents
