Huawei SUN2000-55KTL-HV-D1 User Manual page 79

SUN2000-(55KTL, 60KTL) Series
User Manual
Figure 7-4 Feature Parameters (advanced user)
----End
Parameter List
No. Parameter Description
1 MPPT When the SUN2000 is
multi-peak used in scenarios
scanning where PV strings are
obviously shaded,
enable this function.
Then the SUN2000
will perform MPPT
scanning at regular
intervals to locate the
maximum power.
2 MPPT Specifies the MPPT
multi-peak multi-peak scanning
scanning interval.
interval
3 RCD RCD refers to the
enhancing residual current of the
SUN2000 to the
ground. To ensure
device security and
Issue 02 (2017-07-30)
Unit Default
Value
N/A Disable
min 15
N/A Disable
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range Remarks

Disable The scanning
interval is set by
 Enable
MPPT multi-peak
scanning interval.
[5, 30] This parameter is
displayed only when
MPPT multi-peak
scanning is set to
Enable.
 Disable N/A
 Enable
73