Huawei SUN2000-55KTL-HV-D1 User Manual page 48

SUN2000-(55KTL, 60KTL) Series
User Manual
Cables with high rigidity, such as armored cables, are not recommended, because poor contact
may be caused by the bending of the cables.
Procedure
Step 1 Prepare the positive and negative connectors.
Use the Amphenol UTX DC input terminals provided with the SUN2000. If the terminals are
lost or damaged, purchase the DC input terminals of the same model. Other models of DC
input terminals may be incompatible with the SUN2000, which may cause serious
consequences. The caused equipment damage is beyond the warranty scope.
Figure 5-12 Preparing positive and negative connectors
(1) Positive metal
terminal
After the positive and negative metal terminals snap into place, pull the DC input power
cables back to ensure that they are connected securely.
Step 2 Tighten the locking nuts on the positive and negative connectors.
Issue 02 (2017-07-30)
(2) Negative metal
terminal
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(3) Positive (4) Negative
connector connector
42