Huawei SUN2000-55KTL-HV-D1 User Manual page 80

SUN2000-(55KTL, 60KTL) Series
User Manual
No. Parameter Description
personal safety, RCD
should comply with
the standard. If an AC
switch with a residual
current detection
function is installed
outside the SUN2000,
this function should be
enabled to reduce the
residual current
generated during
SUN2000 running,
thereby preventing the
AC switch from
misoperations.
4 Reactive In some specific
power application scenarios,
output at a power grid company
night requires that the
SUN2000 can perform
reactive power
compensation at night
to ensure that the
power factor of the
local power grid meets
requirements.
5 Power If Power quality
quality optimization mode is
optimizatio set to Enable, the
n mode inverter output current
harmonics will be
optimized.
6 PV module Specifies the type of
type PV modules.
Issue 02 (2017-07-30)
Unit Default
Value
N/A Disable
N/A Disable
N/A Crystalline
silicon
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range Remarks

Disable This parameter is
configurable only
 Enable
when Isolation is
set to Input
ungrounded, with
a transformer.
 Disable N/A
 Enable
 
Crystalline If PV module
silicon
type is set to
Crystalline

Film
silicon or Film,
 CPV 1
the SUN2000
 CPV 2 will run properly
and will not shut
down if PV
modules are
shaded.
 If PV module
type is set to
CPV 1, the
SUN2000 can
restart quickly in
60 minutes if PV
modules are
shaded and the
74