Psion Teklogix Schnellstart- Anleitung 7525 User Manual page 143

Linear security level 1 specifies that the following code types must be successfully
read twice before being decoded:
Linear security level 2 specifies that all types of codes must be successfully read
twice before being decoded.
Linear security level 3 specifies that code types other than the following must be
successfully read twice before being decoded. The following codes must be read
three times:
Linear security level 4 requires that all code types be successfully read three times
before being decoded.
Bi-Direction Redundancy
Note: This parameter is only valid if a" Linear Security Level" is enabled.
When this parameter is enabled, a bar code must be successfully scanned in both
directions (forward and reverse) before being decoded.
2D Scanning Mode
When you double-tap on this parameter, a dialog box is displayed in which you can
choose one of the following scanning modes: Smart Raster, Always Raster,
Programmable Raster, Slab Pattern, Cyclone Pattern or Semi-Omni Pattern.
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Options — Decoded (Internal) Scanner
Code Type
Codabar
MSI Plessey
D 5 of 5
I 2 of 5
Table 6.1 Linear Security Level 1
Code Type
MSI Plessey
D 2 of 5
I 2 of 5
Table 6.2 Linear Security Level 3
(not supported)
Length
All
4 or less
8 or less
8 or less
Length
4 or less
8 or less
8 or less
Chapter 6: Settings
113