Audio Indicators - Psion Teklogix Schnellstart- Anleitung 7525 User Manual

Chapter 3: Getting To Know The WORKABOUT PRO

Audio Indicators

If the unit is attached to an external power supply, the hand-held LED reflects the
battery charge status.
LED Behaviour
Solid Green
Fast Blinking Green
Slow Blinking Green
Solid Red
Blinking Red

3.8.2 Audio Indicators

The audio speaker provides a variety of sounds when a key is pressed, a keyboard
character is rejected, scan input is accepted or rejected, an operator's entry does not
match in a match field or the battery is low. To specify how you want your WORK-
ABOUT PRO to respond under various conditions, refer to "Sound & Notifica-
tions" on page 96.
The volume keys are located above <A> and <B> on WORKABOUT PRO C
models and to the left and right of the arrow key on WORKABOUT PRO S models.
The increase volume key is labelled with a plus symbol
volume key is labelled with a minus symbol
3.8.2.1
• Press the <BLUE> key twice to lock the key 'on' and then, press <A>—the
increase volume key
the volume meets your requirements.
• Remember to press the <BLUE> key again to turn it 'off'.
3.8.2.2
• Press the <FN/BLUE> key twice to lock the key 'on' and then, press the
<RIGHT> arrow key—the increase volume key
arrow key—the decrease volume
requirements.
• Remember to press the <FN/BLUE> key again to turn it 'off'.
38
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Charge complete.
Charge in progress. Battery charged to less than 80%
capacity.
Battery charged to greater than 80% of capacity.
Temperature outside charge range (0° C to 50° C).
Battery is not charging. Battery fault.
Table 3.1 WORKABOUT PRO LED BEHAVIOUR
Adjusting Speaker Volume On The WORKABOUT PRO C
Adjusting Speaker Volume On The WORKABOUT PRO S
Charge Status
.
or <B>—the decrease volume
key until the volume meets your
and the decrease
key until
or the <LEFT>