The Keypad Backlight; The Display; Adjusting The Backlight; Aligning (Calibrating) The Touchscreen - Psion Teklogix Schnellstart- Anleitung 7525 User Manual

Chapter 3: Getting To Know The WORKABOUT PRO

The Keypad Backlight

3.6.4 The Keypad Backlight

The intensity of the keypad backlight can be configured using the Backlight icon
accessed by tapping on Start, Settings. Refer to "Backlight" on page 99 for details
about this option.

3.7 The Display

3.7.1 Adjusting The Backlight

The display backlight can be adjusted using the keyboard.
• Press the Backlight key <
and then back to lightest. Press <ORANGE> <
darker to lighter.
To set the backlight intensity and the duration of time that the backlight will remain on,
you'll need to choose the Backlight icon. Tap on Start, Settings and then, tap on the
System tab. Refer to "Backlight" on page 99 for details about the Backlight icon.

3.7.2 Aligning (Calibrating) The Touchscreen

If your touchscreen has never been aligned (calibrated) or if you find that the stylus
pointer is not accurate when you tap on an item, follow the steps below.
• Tap on Start, Settings. Tap on the System tab to display the Screen icon.
36
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
> to cycle from the lightest to darkest settings,
Figure 3.10 Screen Alignment Tab
> to cycle backward from