Indicators; The Led - Psion Teklogix Schnellstart- Anleitung 7525 User Manual

• Tap on the Screen icon to display the Alignment tab.
• Tap on the Align Screen button, and follow the directions on the screen to
align (calibrate) the screen.
Note: This window provides two additional tabs: ClearType and Text Size. Tap-
ping on the ClearType tab allows you to enable the ClearType option to
smooth screen font appearance. The Text Size tab allows you to increase
or decrease the size of the font displayed on the screen.

3.8 Indicators

The WORKABOUT PRO uses an LED (Light Emitting Diode), onscreen messages
and audio tones to indicate the various conditions of the hand-held, the batteries, the
scans and so on.

3.8.1 The LED

A single, two-coloured LED is located on the left side of the unit, just above the
<BKSP> key. When you press <ENTER/ON>, the LED flashes green to indicate
that the unit has been powered up. The LED table below outlines the behaviour of
the LED while the unit is docked in a charger.
Keep in mind that the application running on the WORKABOUT PRO can dictate
how the LED operates. Review the documentation provided with your application to
determine LED behaviour.
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Figure 3.11 Alignment Screen

Indicators

37