Establishing A Connection - Psion Teklogix Schnellstart- Anleitung 7525 User Manual

6.21.2 Establishing A Connection

To display the main Wireless WAN dialog box:
• Tap on Start, Settings. Tap on the System tab followed by the Wireless
WAN icon.
Note: If you are prompted to enter a PIN, refer to "Entering A PIN Number" on
page 144 for details.
The Status field indicates when the unit is ready to connect–the Connect Data
button is enabled.
• Tap on the Connect Data button.
The progress of the connection is tracked in the Status field.
• PPP link to modem active
• Authenticating user
• User authenticated
• Connected
Note: Keep in mind that these states may be displayed fairly quickly if the
progress of the connection is rapid.
When the connection state reaches PPP link to modem active, the taskbar icon
changes to indicate an active connection. The Connect Data button changes,
displaying Disconnect.
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Figure 6.51 Wireless WAN Screen
Chapter 6: Settings

Establishing A Connection

143