The Sd/Mmc Card-Adding Memory; Inserting The Card - Psion Teklogix Schnellstart- Anleitung 7525 User Manual

Hand-held computer with windows mobile 2003 se
Table of Contents

Advertisement

3.12 The SD/MMC Card—Adding Memory
To add additional non-volatile memory to your hand-held, you can insert a Secure
Digital/Multi-Media Card (SD/MMC) through the battery compartment.

3.12.1 Inserting The Card

Remove the battery cover and the battery.
A hinged door at the top of the battery compartment protects the connectors.
Hinged SD door
Lift the hinged SD door by gently pulling upward on the metal tab.
Orient the SD/MMC card according to the legend stamped into the battery
well plastic.
Place the card in the slot with the card contacts down, and slide it inward
until it latches into place.
Swing the hinged door back into place.
To remove the card:
Gently press it inward slightly until the detent unlatches, and the card is
expelled from the slot.
Psion Teklogix WORKABOUT PRO With Windows Mobile 2003 SE User Manual
Chapter 3: Getting To Know The WORKABOUT PRO
Figure 3.12 Inserting the SD/MMC Card
The SD/MMC Card—Adding Memory
SD/MMC
Card
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Workabout pro

Table of Contents