Plc Settings For Framecombinepulse To Iso_Out1; Miscellaneous Properties; Pixelformat - Photon Focus MV1-D1280-L01-1280-G2-12 User Manual

8 Software

8.10.5 PLC Settings for FrameCombinePulse to ISO_OUT1

This setting connects the FrameCombinePulse signal (see Section 5.1.7) to the output
ISO_OUT1, see Table 8.2 (the visibility in the PF_GEVPlayer must be set to Guru for this purpose).
Feature
PLC_I5
PLC_Q1_Variable0
PLC_Q1_Operator0
PLC_Q1_Variable1
PLC_Q1_Operator1
PLC_Q1_Variable2
PLC_Q1_Operator2
PLC_Q1_Variable3
Table 8.4: PLC Settings
IPEngine/ProgrammableLogicController)

8.11 Miscellaneous Properties

8.11.1 PixelFormat

The property PixelFormat (in category ImageFormatControl) sets the pixel format. For 10 bits and
12 bits there is a selection of plain or packed format. The plain format uses more bandwidth
than the packed format, but is easier to process in the software. Table 8.5 shows the number of
bits per pixel to are required for a pixel format. Fig. 8.5 shows the bit alignment of the packed
pixel formats.
Table 8.5: GigE pixel format overview
The DR1 colour camera models have the BayerGB8 format. This should be used to
display the debayered colour image in the PF_GEVPlayer display. To demodulate
the image by the SDK the format Mono8 must be used.
.
118 of 139
Value
PLC_A7
PLC_I5_Not
Or
Zero
Or
Zero
Or
Zero
for FrameCombinePulse
DataFormat Bits per pixel
Mono8 8
Mono10Packed 12
Mono12Packed 12
Category
<PLC>/SignalRoutingBlock
<PLC>/LookupTable/Q1
<PLC>/LookupTable/Q1
<PLC>/LookupTable/Q1
<PLC>/LookupTable/Q1
<PLC>/LookupTable/Q1
<PLC>/LookupTable/Q1
<PLC>/LookupTable/Q1
to ISO_OUT1 (<PLC> = in category
MAN077 11/2017 V1.0