Rider Seat Installation - EBR 1190RS 2013 Owner's Manual

Rider Seat Installation

1. See figure 35. Slide seat cowl onto bike from the rear.
2. Overlap rear of cowl with rear of tail.
3. Rotate front of cowl down while sliding it forward
4. See Figure 36. Overlap the battery pan with the cowl
as the cowl is rotated down and slid forward.
5. Install seat with four T30 TORX screws and tighten to
85-94 in-lbs (9.6-10.6 Nm)
85
Figure 35
Figure 36
Overlap
Battery
Pan and
Tail